Seatex AIS 100 Instruction Manual, rev. 5
Display pages
16
=== Static Data ===== P14
AIS Transceiver
2/3
Length A:30
Length B:10
Length C:7
Length D:7
===Choose from list ====
Error. Continue Edit?
Abort menu page
If some of the
static data parameters
have been
input with a "zero" or "negative" number, you will
be prompted with the options: "Error. Continue
Edit?" or "Abort menu page". If "Error. Continue
Edit?" is selected, new parameters can be input as
described above. "Abort menu page" will keep the
previous data set.
=== Static Data ===== P14
GPS
2/3
Length A:30
Length B:10
Length C:7
Length D:7
========================
1234567890*< >
As for input of the position for the AIS Mobile
station antenna, the
Static data GPS
page enables
input of the vessel's main GPS/GNSS antenna
position.
3.1.5
Dynamic data
=== Dynamic Data ==== P15
Own Ship
1/2
LAT
:012
°°°°
13’23.56N
LON
:010
°°°°
24’13.73E
COG
:007.58
°°°°
SOG
:009.31Kn
HDG
:328.13
°°°°
ROT
:001.32
°°°°
/min
EPFD
:GPS
QUAL
:DGPS SPS Mode
Dynamic data
is the current status of the vessel.
These data are updated by the sensors and require
no manual data entry.
HDG
and
ROT
requires an external HDG sensor.
If no sensor is connected, the default value is ---.--
QUAL
denotes the quality of the
GPS signal,
either a DGPS or a standard GPS.
=== Dynamic Data ==== P15
Sensor Status
2/2
UTC Lost
Int. DGPS in use (msg17)
Internal SOG/COG in use
Heading valid
Other ROT source in use
Sensor status
gives the current status of external
sensors.
Summary of Contents for Seatex AIS 100
