256
442700/A
•
Yellow
: This is a warning. A closer investigation is recommended.
•
Red
: This is an alarm. A closer investigation is required.
•
Blue
: A device monitored by the diagnostic system is disabled.
•
Grey
: No information is available.
The
Diagnostics
dialog box and functionality is only provided for performance monitoring.
The functionality offered by the dialog box is not required for normal use of the CS90
system. The dialog box does not permit you to change any operational settings.
Procedure
1
Make sure that you have sufficient water depth below the keel before you lower the
transducer.
2
Lower the transducer to its bottom position.
3
Select the default settings.
a
On the
Main
menu, select
User Settings
.
b
Observe the
Factory Settings
list.
c
Select the setting you want to use.
d
Select
Activate Selected Setting
.
e
Select
OK
to apply your changes and close the
User Settings
dialog box.
4
Make the following preparations.
a
On the
Main
menu: Set
Range
to
1500 m
.
b
On the
Operation
menu: Set
Tx Power
to
Maximum
(or any other power rating) to
start pinging.
c
On the
Setup
menu: Select
Diagnostics
to open the dialog box.
Simrad CS90 Reference Manual
Summary of Contents for Simrad CS90
