manualshive.com logo in svg

Kongsberg Simrad CS90, Reference Manual

The Kongsberg Simrad CS90 Reference Manual is a comprehensive user guide for operating the CS90 sonar system. This essential manual can be easily downloaded for free from our website, ensuring users have all the necessary information to maximize their experience with this advanced technology.

Share
Download
background image

666

442700/A

define the physical size of the tracking area........ 113
define the serial port parameters ..................... 197
define the transmission (ping) modes ................. 76
delete existing user settings .......................... 172
delete, copy and move echo data files............... 128
delete, copy and move processed data files ........ 136
Deleting a marker ...................................... 108
enable Coordinated Universal Time (UTC) ........ 159
Enabling and disabling the map

presentation ........................................... 152

expand the range within the sonar range.............. 98
Exporting sensor data to a peripheral

system.................................................. 183

Exporting target markers.............................. 181
Exporting technical information ..................... 184
hide the menu system ....................... 73, 157, 376
hoist the transducer from the sonar

room........................................ 188, 190, 192

hoist the transducer using hand crank............... 190
hoist the transducer using Hoist/Lower

Switch.................................................. 188

hoist the transducer using Hoisting

Contactor .............................................. 192

increase the visibility of the information

panes ................................................... 162

insert the installation parameters for the motion

reference unit ......................................... 221

insert the installation parameters for the

transducer.............................................. 218

inspect and clean the computer ...................... 281
inspect and clean the display ......................... 280
inspect and clean the Hull Unit ...................... 283
inspect and clean the Operating Panel .............. 282
inspect and clean the Processor Unit ................ 281
inspect and clean the transceiver..................... 282
inspect and clean the Transceiver Unit.............. 282
inspect sacrificial anodes.............................. 292
Inspecting and cleaning the transducer face ........ 286
install navigation and other sensors

(summary) ............................................. 195

install the operational software ...................... 231
install the software license............................ 237
lower the transducer from the sonar

room........................................ 188, 190, 192

lower the transducer using hand crank.............. 190
lower the transducer using Hoist/Lower

Switch.................................................. 188

lower the transducer using Lowering

Contactor .............................................. 192

Lowering and hoisting the transducer from the

user interface............................................ 82

make a noise/speed curve to determine vessel

noise.................................................... 263

measure flow noise .................................... 268
measure noise at different speeds.................... 263
measure the size of a school relative to the

purse seine............................................. 109

Measuring the noise in passive mode ............... 261
move the view to another display.................... 145
obtain a software license.............................. 237
place a marker using operating panel ............... 107
place data from a sea current sensor in the sonar

views ................................................... 150

place the menu on the left side of the

presentation ........................................... 158

rearrange the layout of the presentation ............ 146
record processed echo data ........................... 134
Recording echo data ................................... 127
reduce noise and false echoes ........................ 123
reduce noise and reverberation....................... 119
reduce propeller noise and interference............. 120
reduce the light emitted by the display

presentation ........................................... 161

remove the operational software..................... 233
rename saved user settings ........................... 171
replace sacrificial anodes ............................. 292
replay raw data ..................................... 86, 130
restore original views.................................. 147
restore previous views................................. 147
save the current user settings ..................... 75, 169
Saving single or sequential screen captures .......... 74
select a geographical area for accurate

tracking ................................................ 111

select best operating frequency ................... 72, 92
select inactive operating mode ......................... 87
select measurement units ............................. 164
select menu language.............................. 71, 156
select navigational information on the top

bar ...................................................... 158

select normal operating mode ..................... 61, 84
select replay file ........................................ 131
select replay operating mode ..................... 86, 130
select tooltips in the user interface .................. 160
select which operating panel to use ................. 174
Selecting where to save the video files.............. 143
Selecting which map elements to include in the

display presentation .................................. 153

set up synchronization................................. 209
set up the gyro interface............................... 203
set up the Operating Panel ...................... 243, 247
set up the speed log interface......................... 201
Setting up input from buoys, fish aggregating

devices and other external objects ................. 212

Setting up the input from a navigation system

(GPS)................................................... 198

Setting up the presentation of the depth lines in

the map ................................................ 154

Starting a position track............................... 104
Starting a target track.................................. 105
transmit single pings .................................... 89
transmit with fixed-time intervals ..................... 90
transmit with maximum ping rate ..................... 88
turn off ............................................... 70, 83
turn on ................................................ 52, 80
Turning on the CS90 system ........................... 80
Turning on the CS90 system for normal use ......... 52
Updating the online help system..................... 234
use previously saved user settings ................... 170
use the menu buttons .................................. 374

how to

Getting to know presentation modes and

views ..................................................... 57

Painting the transducer face .......................... 289

how to open

Active menu ...................................... 392, 461
Main menu.............................................. 376
Operation menu ........................................ 378
secondary menus....................................... 376
Setup menu ............................................. 385

hull unit

Simrad CS90 Reference Manual

Summary of Contents for Simrad CS90















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Simrad CS90

B&K DT1 Owner'S Manual preview
DT1
Brand: B&K Pages: 8
Parker 6513 Technical Manual preview
6513
Brand: Parker Pages: 54
GE b30 User'S Reference Manual preview
b30
Brand: GE Pages: 242
GE ATS1290 Instruction Manual preview
ATS1290
Brand: GE Pages: 24
Balanced Body Allegro How To Assemble preview
Allegro
Brand: Balanced Body Pages: 3
Gardena 1407 Operator'S Manual preview
1407
Brand: Gardena Pages: 13
ABI Attachments Infield Rascal Pro Setup Manual preview
Infield Rascal Pro
Brand: ABI Attachments Pages: 8
Abicor Binzel BRS-LC Operating Instruction preview
BRS-LC
Brand: Abicor Binzel Pages: 84
ABI Attachments ABI Force Z-23 Product Instruction Sheet preview
ABI Force Z-23
Brand: ABI Attachments Pages: 5
abem Terrameter LS User Manual preview
Terrameter LS
Brand: abem Pages: 47
Abely LiftMeUp Frequently Asked Questions preview
LiftMeUp
Brand: Abely Pages: 5
Ace AFM-5 Operating Manual preview
AFM-5
Brand: Ace Pages: 17
ACE INSTRUMENTS Solid Operating Manual preview
Solid
Brand: ACE INSTRUMENTS Pages: 33
ACE INSTRUMENTS ALP-1 med Quick Start Manual preview
ALP-1 med
Brand: ACE INSTRUMENTS Pages: 2
ACE INSTRUMENTS ACE Easy Quick Start Manual preview
ACE Easy
Brand: ACE INSTRUMENTS Pages: 2
TapFlo DT Series Original Instruction preview
DT Series
Brand: TapFlo Pages: 35
DANA DT Series Assembly Instructions Manual preview
DT Series
Brand: DANA Pages: 8
2E PSE801 User Manual preview
PSE801
Brand: 2E Pages: 6

Brands by name

Popular brands

Load more brands