442700/A
87
Selecting Inactive mode
Inactive
mode is provided to pause the operation temporarily. Neither transmission nor
reception takes place. The current echoes are removed from the display presentation.
Context
The
Operation
function controls the operating mode of the CS90 system.
Note
Note that Inactive operating mode is not the same as Passive mode. While Inactive mode
stops both transmission and reception, Passive mode will still allow the CS90 system
to receive echoes. To select passive mode set
Operation
to Normal,
Noise Filter
and
Tx
Power
to Off.
Procedure
1
Open the
Operation
menu.
2
Set
Operation
to
Inactive
.
When the CS90 system is disabled with this function, it will stop. The transmission
("pinging") stops.The current echoes are removed from the display presentation.
Related topics
Operating procedures, page 79
Choosing operating mode and key transmit parameters, page 84
Selecting Normal mode to start pinging, page 84
Selecting Replay mode, page 85
Selecting Inactive mode, page 87
Operation function, page 427
Summary of Contents for Simrad CS90
