272
394149/D
• One of the acoustic systems is set up as "master", and controls the transmissions on
the other systems.
Procedure
1
Test the synchronization when EK80 operates in
Master
mode.
a
On the
Setup
menu, select
Installation
.
b
Select
Synchronization
.
c
Record the communication parameters in the result table.
d
Select synchronization mode.
e
Select the synchronization delay.
f
Make sure that relevant hydroacoustic systems connected to the EK80 are
synchronized.
2
Test the synchronization when EK80 operates in
Slave
mode.
a
Make sure that the synchronization system is connected.
b
On the
Setup
menu, select
Installation
.
c
Select
Synchronization
.
d
Record the communication parameters in the result table.
e
Select synchronization mode.
f
Select the synchronization delay.
g
Make sure that the EK80 operates normally when triggered by the remote
synchronization system.
Result
Sensor
Source system
Port
Synchronization
Requirements
Results
The external synchronization system is connected to provide trigger pulses
(if relevant).
The EK80 operates in
Slave
mode.
The EK80 operates in
Master
mode.
Relevant communication parameters are recorded.
The EK80 operates while additional hydroacoustic systems (sonars, echo
sounders) are in synchronized operation.
Date and signature:
Related topics
Simrad EK80 Installation Manual
Summary of Contents for Simrad EK80
