RA83/84/85/93/94/95 Series
Chapter 6
Using The Menu
Operation Manual
6.2.3.2 PLOT MODE (Plotting Mode)
Indication Meaning
Selection
PLOT MODE
Plot
Mode
EPA, ATA
In the RA83/84/85/93/94/95 radar series, the Electronic Plotting Aid (EPA) function is
installed as standard, while the Automatic Tracking Aid (ATA) unit is an optional item.
To use the ATA function, the ATA module (PCB based) must be installed inside the
processor unit.
To use the EPA and ATA functions, the bearing and speed information
must be applied from an external bearing/speed sensor.
CAUTION:
6.2.3.3 TARGET ALL CLEAR (Plotting Target All Clear)
Using this function, all target plots can be cleared. To do so, highlight the “TARGET
ALL CLEAR” sign and press the ENT key.
Indication
Meaning
Selection
TARGET ALL CLR
All plotted targets cleared
None
6.2.3.4 ID DISP (ID Number Display)
When this item is set to ON, the target number is indicated beside the target symbol
mark.
Indication Meaning
Selection
ID DISP
Target ID Display
OFF, ON
6.2.3.5 AIS (Automatic Identification Systems) Data Display
This function is available on option basis. For operating details, refer to Para. 6.8
“Operating the AIS.”
6.2.3.6 Navigation Display, Map function
Indication
Meaning
Selection
NAV ALIGN MODE
Navigation Display Align Mode
OFF, MANUAL, SERIAL
MAP
Map
Display
OFF, ON
MAP DATUM
Map Display Datum
NONE, WGS84, WGS72,
SGS85,
PE90
GPS DATUM
GPS Datum
See NOTE
REFERENCE
LOCAL
NOTE: The GPS DATUM (REFERENCE or LOCAL) is shown only when SERIAL is
selected as NAV ALIGN MODE.
93142105-02
6-9
