442704/A
19
Note
If you turn off the ST90 system by means of the on/off switch on the Processor Unit you can
damage the software and the interface settings used to communicate with external devices.
Manual operation of the hull unit
In the event of improper operation, the powerful electric motor on the hull unit may cause
serious damage to the equipment and/or injury to personnel. Therefore, before you start
manual operation, read carefully through the relevant operating procedures.
Note
You must familiarize yourself with the correct handling methods and the relevant safety
requirements.
Rules for transducer handling
A transducer must always be handled as a delicate instrument. Incorrect actions may damage
the transducer beyond repair. A physical blow to the transducer face may easily damage one
or more elements. Observe these transducer handling rules:
•
Do not
activate the transducer when it is out of the water.
•
Do not
handle the transducer roughly. Avoid impacts.
•
Do not
expose the transducer to direct sunlight or excessive heat.
•
Do not
use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer.
•
Do not
damage the outer protective skin of the transducer.
•
Do not
damage the outer protective skin of the transducer face.
•
Do not
step on the transducer cables.
•
Do not
damage the transducer cables. Avoid exposure to sharp objects.
Related topics
Summary of Contents for Simrad ST90
