442704/A
73
b
Select
Start Noise Measurements
.
c
On the
Active
menu, change the
Frequency
setting while observing the noise value.
d
Note frequencies with high noise levels, and try to avoid using them.
Tip
The factory default settings include operating frequency. If you apply these settings
remember to make the appropriate changes afterwards.
Related topics
Getting started, page 34
Basic operating procedures, page 71
Frequency function, page 476
Hiding the menu system when you do not need it
Unless you need to make frequent changes to the operating parameters, you may want to hide
the menu from the display presentation. This gives you more space for echo information.
Context
The menu system is by default located on the right side of the display presentation. The
menus are organized in a tree structure with a main menu, a set of secondary menus, and
several menu buttons.
Tip
The
Menu on the right side
option is provided in the
Display Options
dialog box. By
deselecting this function, the entire menu system is placed permanently on the left side of
the display presentation.
Procedure
1
To hide the menu, select
Menu
on the top bar.
When the menu is hidden, it is temporarily shown on the left or right side of the display
presentation if you move the cursor to that position.
2
To retrieve the menu, select
Menu
one more time.
Summary of Contents for Simrad ST90
