64
Assembly Completion
After assembly is complete, charge the wheel lift cylinders with a tractor or hydraulic unit, fully
extending and retracting the cylinders several times. Hold the hydraulic lever open at the end of the
stroke to purge the air from the system. Fully extend the lift cylinders and install the transport safety
locks onto the center lift cylinders.
Final Inspection
When the machine is fully assembled, verify all nuts, bolts and other connections are secure. Be
sure to read the Owners Manual before attempting to operate the unit. The Owners Manual provides
important instructions and safety precautions that must be followed before attempting to hook up
and move the unit after assembly.
��������������
The wing fold cylinders must be charged with oil before attempting to fold the cultivator.
Disconnect the cylinder rod clevis from the wings and block up the cylinder. Extend and retract the
cylinders several times with a tractor or hydraulic unit, holding the lever at the end of the stroke to
purge the air from the system. After fold cylinders are charged, re-connect them to the wings.
Slowly fold the wings to the transport position. Insert the wing lock safety pins.
CAUTION:
ALWAYS INSTALL
THE TRANSPORT LOCK
ONTO THE CENTER LIFT
CYLINDERS WHEN THE
IMPLEMENT IS PLACED IN
THE RAISED POSITION FOR
TRANSPORT, MAINTENANCE
OR STORAGE. Secure with the
pin and lock clip provided.
���������
����������
CAUTION:
Never transport the implement on public road ways without installing the transport
safety chain and SMV sign.
Refer to the Owners Manual for further safety information before attempting to operate or service
the unit.
CAUTION:
ALWAYS
INSTALL THE WING LOCK
SAFETY PINS WHEN THE
IMPLEMENT IS FOLDED FOR
TRANSPORT, MAINTENANCE
OR STORAGE.
Summary of Contents for 8200 DF Series
