4-4
AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
Loading Paper
4
4.1
5
Slide the
rear guide plate
to any position.
%
To slide the
rear guide plate
to the right, hold the top,
and slide the
rear guide plate
while pressing it down
slightly.
%
To slide the
rear guide plate
to the left, hold the bottom,
and slide the
rear guide plate
while pressing it down
slightly.
%
Determine their locations based on the size indicator of
the bottom plate of the tray.
NOTICE
When moving the
rear guide plate
to the right, it will not slide smoothly without downward pressure.
Also, when moving it to the left, it will not slide smoothly if you hold the top of the
rear guide plate
.
Be careful because forcefully moving the
rear guide plate
may damage it.
6
To fix the
side guide plates
at the correct locations, load an appropriate amount of paper into the tray
while aligning it to the right-hand side of the tray.
NOTICE
Load paper with the print side facing down.
7
Pushing the
side guide lock release lever
, align the
side
guide plate
to the paper.
8
Turn two
side guide lock knobs
(in the front and rear sides)
clockwise, and fix them.
9
Load the remaining paper into the tray, then press the
rear
guide plate
against the paper.
NOTICE
Do not load more than 500 sheets (80 g/m
2
/ 21 lb Bond) into
Tray 1, and more than 1,000 sheets (80 g/m
2
/ 21 lb Bond)
into Tray 2. Also, do not load paper above the
,
mark that
indicates the height limit on the
side guide plate
. Other-
wise, a paper jam may occur.
Be sure that the
rear guide plate
is securely pressed
against the paper. If there is any gap between the
rear guide
plate
and the paper, this machine will not be able to detect
the correct paper size. It may cause a paper feeder machine
error.
Check paper for kinks. Otherwise, a paper jam may occur.
10
Close the tray.
%
Push the tray in until it locks into place.
The amount indicator changes from
to
in the tray information display area of the [MA-
CHINE] or [COPY] screen.
NOTICE
Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the
tray or paper weight, which may lead to a machine error.
Summary of Contents for AccurioPress C3070
