User's Guide
- 225 -
Action
Yes
No
Step 2
1.
From the Paper Menu, set the
paper type and weight to match
the paper loaded in the tray. To
access the Paper Menu, do
either of the following:
-
If the printer is on a
network, then open a Web
browser and type the printer
IP address in the address
field. Then navigate to
Settings
>
Paper Menu
.
Note:
If you do not know
the IP address of the
printer, then print a network
setup page and locate the
IP address in the TCP/IP
section.
-
If the printer is connected to
a computer by a USB cable,
then open the Local Printer
Settings Utility for Windows
or Printer Settings for
Macintosh.
2.
Resend the print job.
Do vertical voids still appear on
prints?
Go to step 3.
The problem is solved.
Step 3
Check if you are using a
recommended type of paper.
1.
Load the specified tray or feeder
with a recommended type of
paper.
2.
Resend the print job.
Do vertical voids still appear on
prints?
Go to step 4.
The problem is solved.
