bizhub 4752/4052
H SERVICE MODE > 2. Starting procedure
H-2
2. Starting procedure
NOTE
▪ Ensure appropriate security for Service Mode function setting procedures. They should NEVER be shown to any unauthorized
person not involved with service jobs.
2.1 Procedure
1.
Touch Menu.
2.
Touch [Counter].
3.
Touch [Display Keypad].
4.
Press the following keys in this order.
• Stop -> 0 -> 0 -> Stop -> 0 -> 1
5.
Enter the CE password and touch [END]. (The CE password is initially set to “9272927292729272.”)
NOTE
▪ When [Administrator Settings] -> [Security Settings] -> [Enhanced Security Mode] is set to “ON”, CE password
authentication is necessary.
▪ If a wrong CE password is entered, re-enter the right password.
The machine will not enter Service Mode unless the CE password is entered correctly. To return to the basic screen, turn
OFF the main power switch and turn it ON again.
▪ When [Administrator Settings] -> [Security Settings] -> [Security Details] -> [Prohibited Functions When Authentication
Error] is set to “Mode 2”, operation will be prohibited since it indicates authentication failure by failing to enter the correct
CE password within the specified number of times.
If the access lock is activated, the lock release timer starts to operate by input the Stop -> 0 -> 9 -> 3 -> 1 -> 7 in Menu ->
[Counter] -> [Print List] -> [Display Keypad] after the main power switch is turned OFF and On.
When the timer reaches the time specified in this setting, the access lock is released.
▪ The service code entered is displayed as “ * ”
6.
The Service Mode menu will appear.
NOTE
▪ Be sure to change the CE password from its default value.
▪ For the procedure to change the CE password, see the [Enhanced Security] -> [CE Password].
▪ NEVER forget the CE password.
