604E 94070
• Be sure to read this manual before using this machine. Always keep this manual on hand after reading it.
• Do not edit, alter or indiscriminately reprint this manual.
• The content of this manual may be changed in the future without notice.
• Each illustration included in this manual shows only one example. Variations may occur, depending on the device, software and
OS version you are using.
• For information about trademarks, refer to the "User's Guide".
bizhub C3120i/C3100i
Setup Guide
Konica Minolta, inc.
AE1V-9910-00
2022. 2
Setting up this machine
• Please read "Safety Information (page 5)" before setting up
this machine.
• The illustrations used in each procedure are based on bizhub
C3120i as an example unless otherwise specified.
1.
Check the items included in the package.
• Main unit
• Power cord
• Modular cable (bizhub C3120i only)
• This book
• User’s Guide CD (for regions other than North America and
Europe)
• Drivers & Utilities CD-ROM (for regions other than North America
and Europe)
• Please prepare the USB cable or LAN cable by yourself.
2.
Pull out the tapes.
(1)
Open the right side cover.
(2)
Pull out the four tapes.
(3)
Close the right side cover.
3.
Load the paper into the tray.
(1)
Supporting the paper tray with both hands, pull it out
completely.
(2)
Move the paper guides to the position to fit the paper size.
(3)
Place the side you want to copy or print on facing up, and
load the paper with its leading edge aligned with the interior
end of the tray.
Do not load an excessive number of sheets such that the top of the
stack is higher than the
,
mark.
If paper is curled, flatten it before loading it.
• The copy function is available in bizhub C3120i.
