9
For U.S.A.
FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the cover of this equipment is a
label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If required, this information must be provided
to the telephone company.
This equipment uses certification jack USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that
is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US: AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN
of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide advance
notice in order for you to make necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty
information, please contact the Konica Minolta dealer location where you
purchased this equipment. If the equipment is causing harm to the
telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corporation
commission for information. If you home has specially wired alarm
equipment connected to the telephone line, ensure the installation of
equipment does not disable you alarm equipment. If you have questions
about what will disable alarm equipment, consult your telephone
company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device, including FAX
machines, to send any message unless such message clearly contains in
a margin at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an identification
of the business or other entity, or other individual sending the message
and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided may not be a
900 number or any other number for which charges exceed local or
long-distance transmission charges.)
In order to program this information into your FAX machine, you should
complete the following steps: See Sending after Renaming the Sender
([Sender Settings]), of the User's Guide [Fax].
We use over AWG 26 FAX cord.
WARNING/CAUTION Explained
• The exclamation point within an equilateral triangle followed by the
word "Warning" is intended to alert the user to the possibility that a
disregard for the warning may result in fatal hazards or critical
injuries. Be sure to focus your attention on the Warning headings
when reading this Setup Guide.
• The exclamation point within an equilateral triangle followed by the
word "Caution" is intended to alert the user to the possibility that a
disregard for the caution may result in minor injuries or in physical
damage. Be sure to focus your attention on the Caution headings
when reading this Setup Guide.
For Europe
The Facsimile has been confirmed to meet the standards (or
requirements) ETSI for pan-European single terminal connection to the
public switched telephone network (PSTN).
Space requirements
To ensure that machine operation, consumables replenishing, part
replacement, and regular maintenance can easily be performed, adhere to
the recommended space requirements detailed below.
•
bizhub C3120i
•
bizhub C3100i
Be sure to allow a clearance of 8 inches (200 mm) or more at the
back of this machine for the ventilation duct.
3.94
(100)
13.32
(338.4)
16.14
(410)
33.4
(848.4)
8.89 (225.7)
16.93 (430)
16.57 (420.8)
42.38 (1076.5)
Unit: inch (mm)
3.94
(100)
13.32
(338.4)
16.14
(410)
33.4
(848.4)
8.89 (225.7)
16.93 (430)
16.57 (420.8)
42.38 (1076.5)
Unit: inch (mm)
