BizHub C352 User Guide
4
BizHub C352 Control Panel
Figure 1
Icon
Name
Description
1
[Power Save] key
Press to enter Power Save mode. While the machine is in Power
Save mode, the indicator on the [Power Save] key lights up in
green and the touch panel goes off. To cancel Power Save mode,
press the [Power Save] key again.
2
Touch panel
Displays various screens and messages. Specify the various
settings by directly touching the panel.
3
[Access] key
If user authentication or account track settings have been applied,
press this key after entering the user name and password (for user
authentication) or the account name and password (for account
track) in order to use this machine. This key is also used to log off.
4
[Box] key
Press to enter Box mode. While the machine is in Box mode, the
indicator on the [Box] key lights up in green.
5
[Fax] key
Press to enter Fax mode. While the machine is in Fax mode, the
indicator on the [Fax] key lights up in green.
6
[Scan] key
Press to enter Scan mode. While the machine is in Scan mode,
the indicator on the [Scan] key lights up in green.
7
[Copy] key
Press to enter Copy mode. (As a default, the machine is in Copy
mode.) While the machine is in Copy mode, the indicator on the
[Copy] key lights up in green.
8
[Reset] key
Press to clear all settings (except programmed settings) entered in
the control panel and touch panel.
9
[Interrupt] key
Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and the
message “Now in Interrupt mode.” appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key again.
10
Auxiliary power button
Press to turn on/off machine operations, for example, for copying,
printing or scanning. When turned off, the machine enters a state
where it conserves energy.
11
[Stop] key
Press the [Stop] key during scanning to stop the scan operation.
12
[Start] key
Press to start scanning. When this machine is ready to begin
scanning, the indicator on the [Start] key lights up in green. If the
indicator on the [Start] key lights up in orange, scanning cannot
begin. Press to restart a stopped job.