2/27/2020 5:45 PM
／
D11
18
4
Slide the rear guide plate outward.
To slide the rear guide plate to the right, hold the
top as illustrated, and slide the rear guide plate
while pressing it down slightly.
On the other hand, hold and slightly press down the
bottom of the rear guide plate to slide the rear
guide plate to the left.
NOTICE
■
The rear guide plate cannot be slid smoothly
to the right side without being pressed down.
Also, holding the rear guide plate at the top
may fail to slide it to the left side.
■
Be careful not to move the rear guide plate by
force, otherwise it may be damaged.
5
Load paper so that the stack of paper is
aligned against the right side of the tray.
NOTICE
Do not load more than 500 sheets (80 g/m
2
/
21 lb Bond) in Tray 1 (upper tray) or more
than 1,000 sheets (80 g/m
2
/ 21 lb Bond) in
Tray 2 (lower tray). Also, do not load paper
above the limit indicated on the side guide
plate. Otherwise, a paper jam may be caused.
Forcibly pushing the tray into the main body
with paper loaded close to the limit may
misalign the paper stack. Gently push the tray
into the main body.
6
Pushing the side guide lock release lever,
align the side guide plate to the paper.
