2/27/2020 5:45 PM
／
D11
1
Table of contents
Want to Do/
Step
Execution
Timing
Procedure
Page
1a. Dairy Care/
Preparation
Initial only
(one time)
- Basic settings (step 1-35)
- Setting Summary
p.2
p.12
1b. Dairy Care/
Execution
Everyday
- Auto Run (step 1-6)
p.13
Once a day
- Manual Execution (step 7-12)
p.15
2. Adjust registration for
new paper/
Execution
When Combination
of Paper and tray
is changed
- Loading paper to
/Main Body (step 1-9)
/PF-602m(normal) (step 10-19)
/PF-602m(small) (step 20-25)
/PF-707m(normal) (step 26-34)
/PF-707m(small) (step 35-40)
/LU-202m/202XL/XLm (step 41-49)
p.17
-Auto Measure (step 50-62)
p.34
3a. Keep registration and
constant color reproduction
during long printing for the
job
with Trim Margin
/
Preparation
When paper is
changed
- Confirm paper size (Step 1)
- Conformation of Auto Image Adj.
Settings (Step 2-11)
- Package color auto adj. incl
Color Density Control (Step 12-17)
- Both side adjustment (Step 18-30)
- Setting Summary
p.38
p.46
3b.Keep registration and
constant color reproduction
during long printing for the
job
with Trim Margin
/
Execution
When you start
printing long job
actually
- Print the job by
/Konica Minolta controller (A)
/EFI controller (B)
/CREO controller (C)
p.47
4a.Keep registration and
constant color reproduction
during long printing for the
job
without Trim Margin
/
Preparation
When paper is
changed
- Color Density Control setting
(Step 1-7)
- Periodical Both Side Adjustment
setting (Step 8-9)
- Setting Summary
p.49
p.51
4b.Keep registration and
constant color reproduction
during long printing for the
job
with Trim Margin
/
Execution
When you start
printing long job
actually
- Print the job by
/Konica Minolta controller (A)
/EFI controller (B)
/CREO controller (C)
p.52
NOTICE
This manual describes the procedures for C3080 as an example.
