2/27/2020 5:45 PM
／
D11
22
17
Lower the bottom plate of the tray.
Turn the bottom plate fixing knob counterclockwise
to release the lock.
The tray bottom plate automatically goes down.
18
Load remained paper with the print side
up.
Align the stack of paper to the left side of the tray.
Pushing the lock release lever of the rear guide
plate, align it to the edge of
the paper.
NOTICE
■
Do not load above the limit level indicated on
the side guide plate of the tray. Also, carefully
load paper not to block the air nozzle.
■
Be sure that the rear guide plate is securely
aligned to the paper. If any gap is left
between the rear guide plate and paper, the
machine cannot detect the correct paper size,
and paper jams or machine trouble may be
caused.
19
Push in the tray until it locks into place.
The paper level indicator of the tray changes from
"
" to " " on the [MACHINE] screen and [COPY]
screen.
