2/27/2020 5:45 PM
／
D11
35
54
When the [Print Mode] screen is
displayed, enter
three
as a number of
adjustment charts, and press [Start] on
the control panel.
Up to 20 adjustment charts can be printed out. As the
number of charts
increases, the accuracy of adjustment values rises.
55
The [AutoMeasure] screen is displayed,
and each adjustment value on this screen
is updated.
To check Front-Back registration gap,
press [Gap].
NOTICE
If you use [AutoMeasure] function to check
Front-Back registration gap instead of using
[Gap], registration is RE-ADJUTED and couldn’t
confirm final registration gap.
Therefor use [Gap].
56
Press [Print Mode].
