Field Service Ver. 1.0 Jun. 2008
5. Service Mode
DF-612/SP-503/MS-501
Adjustment / Setting
5.2.3
Regist Loop
5.2.4
Erasure Width
Functions
• To adjust the length of the loop to be formed in paper before the registration rollers.
Use
• When an original misfeed or skew occurs.
Adjustment
instructions
• The loop value increases by the e value and decreases by the entered - value.
Adjustment
range
• [1-Sided]: -5 to +5 mm
• [2-Sided]: -5 to +5 mm
Setting/
procedure
1.
Call the Service Mode to the screen.
2.
Touch [Scan Area].
3.
Touch [ADF Adjustment].
4.
Touch [Regist Loop].
5.
Select either [1-Side] or [2-Sided] for the adjustment.
6.
Press the clear key and change the setting value using the 10-key pad. (Press the [+/-]
key to change the +/- code.)
7.
Touch [OK].
8.
Press the Reset key.
9.
Touch [OK] on the Service Mode screen.
10.
Turn OFF the main power switch, then wait for 10 sec. or more and turn ON the main
power switch.
Functions
• To set the erase width of the ADF.
Use
• Use when changing the width of the area not to be printed on the leading and side
edges of the image.
Adjustment
range
• 0 to 3 mm
Setting/
procedure
1.
Call the Service Mode to the screen.
2.
Touch [Scan Area].
3.
Touch [ADF Adjustment].
4.
Touch [Erasure Width].
5.
Enter the numeric value from the 10-key pad and touch [OK].
6.
Press the Reset key.
7.
Touch [OK] on the Service Mode screen.
8.
Turn OFF the main power switch, then wait for 10 sec. or more and turn ON the main
power switch.
Y109850-7 Service Manual 37
