6. Mechanical adjustment
Field Service Ver. 1.0 Jun. 2008
DF-612/SP-503/MS-501
Adjustment / Setting
8.
Loosen the four mounting screws [1]
of the left hinge as viewed from the
rear.
9.
Move the reverse automatic docu-
ment feeder in either direction shown
by the arrows and select an appro-
priate graduation line [1].
• When the amount of deviation is a
positive value, move it in the direction
A.
• When the amount of deviation is a
negative value, move it in the direction
B.
10.
After the adjustment, tighten the four screws that hold the hinges.
A0EYF3C506DA
[1]
[1]
A
B
A0EYF3C507DA
[1]
42
Service Manual Y109
850
-
7
