Konica Minolta Di5510 Advanced Information Download

Page: 327 / 488

Network functions

Di5510/Di7210

6-29

6.4

Setting the E.K.C. function (Environment Setup)

Make the following user's choice settings for the E.K.C. function. Use the
web browser on a PC for this.

E.K.C. Data Add
Add new E.K.C. data to the E.K.C list (password, name and copy limit).

E.K.C. Data List
Change or delete the E.K.C. data (password, name or copy limit) in the
list, or reset the counter.

E.K.C. Function Setting
Show the following E.K.C. function settings.

Enabling and disabling the E.K.C. function
(EKC ON/OFF)

Selecting the response when the copy limit has been reached:
Warning
Immediately / After job / Warning

E.K.C. password acceptance: 8 characters / fewer than 8 characters

E.K.C. password input timing:
Auto reset timer/ Complete job

Wrong E.K.C. password (from printer):
Accept / Reject

Tip

The above settings can also be made directly at the device, except for
the setting for Wrong E.K.C. password (from printer).

Summary of Contents for Di5510









































































































































































































































































































































































































































































































Search results

Summary of Contents for Di5510

Reviews:

Related manuals for Di5510

Brands by name

Popular brands

Konica Minolta Di5510, Advanced Information

Search results

Summary of Contents for Di5510

Reviews:

Related manuals for Di5510

Brands by name

Popular brands