7
Settings in Key Operator Mode
7-18
Di5510/Di7210
(3) Setting the Zoom Ratio (Lens Mode)
Specify the user defaults for the zoom ratio.
1
Call up key operator mode.
The key operator mode menu is displayed.
2
In the key operator mode menu press the [3]
User setting menu
key.
A submenu appears.
3
Press the [3]
Lens mode ratio setting
key.
The screen for setting the zoom ratios appears.
4
Select the zoom ratio that you want to change.
5
Use the touch screen keypad to enter a new zoom ratio from 0.250 to
4.000 (25% to 400%).
The default setting for the user-defined lens ratios is:
H
Userset 1: 4.000
H
Userset 2: 2.000
H
Userset 3: 0.500
6
Change any other zoom ratios as you like.
7
Press the [OK] key to confirm your input.
The submenu appears again.
8
Press the [Return] key.
The key operator mode menu is displayed again.
Summary of Contents for Di5510
