7
Settings in Key Operator Mode
7-46
Di5510/Di7210
(5) Timer Interrupt Password Setting
Set the timer interrupt password.
The user must input the timer interrupt password to be able to use the
system during the weekly timer period.
1
Call up weekly timer mode.
A submenu appears.
2
In the submenu press the [5]
Timer interrupt password setting
key.
The dialog for assigning a timer interrupt password is displayed.
3
Use the numeric keypad on the touch screen to enter the 4-digit
password.
4
Confirm your input by pressing [OK].
The submenu appears again.
5
Press the [Return] key.
The key operator mode menu is displayed again.
Code 0000!
If you input 0000 as the password, the weekly timer can be interrupted
by switching the system off and on again. In this case, you will be
prompted to input the duration of the interruption after switching on.
Summary of Contents for Di5510
