Overview
1–4
AD3435_en
|
2017-11-17
Print Sequence
Each time the imager receives a print request, the following print sequence occurs. The
arrows show the film path.
1. Suction cups in the pickup area lift a single sheet of film out of one of the supply
cartridges and feed the film into the transport rollers.
2. The transport rollers move the film down to the accumulator area.
3. The film reverses direction and moves up during imaging (as the optics module writes
the image onto film). Then the film moves up to the processor.
4. As the film passes over the processor drum, the heat generated by the drum develops
the film.
5. The exit rollers move the developed film to the exit tray.
