Ch.3 Setup
< 115 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
The methods of allocation depending on format type are shown below.
<Central Allocation>
Spaces between frames are equal with margins at left and right
sides expanded.
<Even Allocation>
Spaces between frames are expanded, leaving the
upper/lower/left/right margins unchanged.
Item
Default
Descriptions
INTEGRAL MULTIPLE
CH01~16 : 1
Sets the enlargement ratio valid when smoothing is set "7."
RATIO
Used, for example, when the user wishes to specify print size, but
the diagnostic device cannot send a specific size infomation of the
requested image.
Settings may be made within a range of "1" ~ "32."
P VALUE RECEIVE
CH01~16 : OFF
Sets image gray scale conversion ON or OFF.
Unless otherwise instructed, this setting need not be changed.
"ON"
: Gray scale conversion is carried out using the P value.
"OFF"
: Gray scale conversion is carried out using the previous
method.
FORMAT
CH01 : CENTER
This setting determines space allocation between frames in multi-
CH02 : EVEN
format printing.
CH03 : CENTER
"CENTER"
: Central allocation.
CH04~16 : EVEN
"EVEN"
: Even allocation.
"H CENTER"
: Central allocation (When diagnostic device is of
Hitachi manufacture)
"H EVEN"
: Even allocation (When diagnostic device is of
Hitachi manufacture)
