Ch.3 Setup
< 117 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
7
Make maximum/minimum density, illumination,
ambient light and flip settings.
- Touching maximum/minimum density, illumination
and ambient light buttons produces display of a
set value input screen.
- Make the flip setting by touching either the ON or
OFF button.
8
Touch the [>] button at the bottom left of the
screen.
- The print condition setting screen (3/7) will be
displayed.
9
Make sorter destination bin, film orientation,
nega/posi, background density and trim settings.
- Use the [<][>] buttons to switch between the
selection for sorter destination bin, film
orientation, nega/posi, and background density
settings.
- Make the trim setting by touching either the ON or
"OFF" button.
7
8
9
6
Touch the [>] button at the bottom left of the
screen.
- The print condition setting screen (2/7) will be
displayed.
6
5
Make LUT selection, density (dark/light),
contrast (strong/weak) and smoothing settings.
- Use the [<][>] buttons to switch between the
selection for LUT selection, density (dark/light),
contrast (strong/weak) and smoothing settings.
5
10
Touch the [>] button at the bottom left of the
screen.
- The print condition setting screen (4/7) will be
displayed.
10
