Ch.3 Setup
< 120 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
3.10 LUT Settings
An outline of DRYPRO 793 LUTs is presented below.
A maximum of 7 LUT data may be registered in DRYPRO 793 for one diagnostic device.
LUT data may be registered in one of the following three ways.
(1) Registration of LUT data read from the DRYPRO 793 internal library.
(2) Registration of LUT data read from the DRYPRO 793 internal library after making fine adjustments.
(3) Registration of newly created LUT data.
A list of LUT data in the DRYPRO 793 internal library is set out below.
p.186 LUT SETUP
(Web Mainte. Mode)
LUT Name
Modality
Film
Description
CT&MR_KC_B
LUT of our recommendation for blue base film on CT/MR.
CT&MR_LOW_B
Blue
LUT with slightly lower density setting than CT&MR_KC_B.
CT&MR_HIGH_B
CT/MR
LUT with slightly higher density setting than CT&MR_KC_B.
CT&MR_KC_C
LUT of our recommendation for clear base film on CT/MR.
CT&MR_LOW_C
Clear
LUT with slightly lower density setting than CT&MR_KC_C.
CT&MR_HIGH_C
LUT with slightly higher density setting than CT&MR_KC_C.
SIEMENS_CT_B
Blue
LUT of our recommendation for blue base film on Siemens CT.
PHIL_CT&MR_B
LUT of our recommendation for blue base film on Philips CT/MR.
LINEAR
Blue/clear
LUT of our recommendation for use on CR.
SENOGRAPHE_K
Mammo
LUT of our recommendation for Mammo film on SENOGRAPHE of GEYMS.
SENOGRAPHE_A
CR
LUT with slightly higher density setting than SENOGRAPHE_K.
P-RECEIVE300
Blue/clear
LUT of our recommendation for blue/clear film using "P" value.
P-RECEIVE400
Mammo
LUT of our recommendation for Mammo film using "P" value.
DSA_KC_B
LUT of our recommendation for blue base film on DSA.
DSA_LOW_B
Blue
LUT with slightly lower density setting than DSA_KC_B.
DSA_HIGH_B
LUT with slightly higher density setting than DSA_KC_B.
DSA_LINEAR_B
DSA
Linear LUT for blue base film on DSA.
DSA_KC_C
LUT of our recommendation for clear base film on DSA.
DSA_LOW_C
Clear
LUT with slightly lower density setting than DSA_KC_C.
DSA_HIGH_C
LUT with slightly higher density setting than DSA_KC_C.
DSA_LINEAR_B
Linear LUT for clear base film on DSA.
US_KC_B
LUT of our recommendation for blue base film on US.
US_LOW_B
Blue
LUT with slightly lower density setting than US_KC_B.
US_HIGH_B
US
LUT with slightly higher density setting than US_KC_B.
US_KC_C
LUT of our recommendation for clear base film on US.
US_LOW_C
Clear
LUT with slightly lower density setting than US_KC_C.
US_HIGH_C
LUT with slightly higher density setting than US_KC_C.
RI_KC_B
LUT of our recommendation for blue base film on RI.
RI_LOW_B
Blue
LUT with slightly lower density setting than RI_KC_B.
RI_HIGH_B
RI
LUT with slightly higher density setting than RI_KC_B.
RI_KC_C
LUT of our recommendation for clear base film on RI.
RI_LOW_C
Clear
LUT with slightly lower density setting than RI_KC_C.
RI_HIGH_C
LUT with slightly higher density setting than RI_KC_C.
DR_KC_B
LUT of our recommendation for blue base film on DR.
DR_LOW_B
Blue
LUT with slightly lower density setting than RI_KC_B.
DR_HIGH_B
LUT with slightly higher density setting than RI_KC_B.
DR_KC_C
DR
LUT of our recommendation for clear base film on DR.
DR_LOW_C
Clear
LUT with slightly lower density setting than RI_KC_C.
DR_HIGH_C
LUT with slightly higher density setting than RI_KC_C.
HIT_CLAVIS_B
Blue
LUT of our recommendation for clear base film on CLAVIS of Hitachi
