Ch.3 Setup
< 121 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
1
Switch to the service maintenance mode.
p.86 Switching to
the Service
Maintenance
Mode
2
Touch the [PRINT] button.
- Print setting buttons will be displayed.
3
Touch the [LUT SETUP] button.
- The LUT setting screen will be displayed.
- Proceed with LUT registration in one of the
following three ways.
(1) Registration of LUT data read from the DRYPRO
793 internal library.
(2) Registration of LUT data read from the DRYPRO
793 internal library after making fine
adjustments.
(3) Registration of newly created LUT data.
Displaying the LUT Selection Screen
Whichever method of LUT registration is used, the LUT selection screen must first be displayed.
The procedure for displaying the LUT selection screen is described below.
1
Select the LUT number to be registered by
touching the scroll buttons at the left and right of
the edit LUT number.
(1) Registration of LUT data read from the DRYPRO 793
internal library.
The procedure for registration of LUT data read from the DRYPRO 793
internal library is described below.
2
3
1
