Ch.6 Web Maintenance Mode
< 173 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
Item
Default
Descriptions
TRAY SERIES USE
ON
Sets operation for use of the same film size/type in multiple trays.
"ON"
: Multiple trays operate as one tray.
1つのトレイのフィルムが無くなっても、別のトレ
イに同一フィルムサイズ/タイプのフィルムが残存
している場合、EMPTY状態にはなりません。
"OFF"
: Multiple trays operate independently.
別トレイに同一フィルムサイズ/タイプのフィルム
が残存していても、EMPTY状態になります。
TRAY SERIES SET
OFF
Sets the film set operation mode valid when all trays are empty.
"ON"
: Film set operation is continued.
"OFF"
: Film set operation is not continued.
Display is returned to the normal screen.
The following conditions apply to setting changes.
Film size, type, count and package count settings are not possible for trays
whose [Tray Use] is set to [Not in Use].
Film size, type, count and package count settings are not possible.
When the [Tray Use] is set to [Not in Use].
Tray 2 and 3 settings are not displayed (setting changes not possible.
When the [Mounted Tray Count] is set to "1".
Tray 3 setting are not displayed (setting changes not possible).
When unprocessed jobs remain in DRYPRO 793.
All setting changes are not possible.
When an optional additional supply tray is mounted, the [Mounted Tray Count]
and [Tray Use] settings should be changed.
Changes to settings should not be made until after the additional tray has been
mounted in DRYPRO 793.
Making setting changes before the additional tray is mounted will result in error.
To prevent mistakes in setting changes that may occur when making settings
from locations where the actual device cannot be visually checked, the system is
designed so that the [Mounted Tray Count] cannot be changed from the Web
Maintenance Mode.
Changes must be made from service maintenance mode.