Ch.6 Web Maintenance Mode
< 177 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
Item
Default
Descriptions
SIZE TYPE CHECK
CH01~16 : ON
This setting determines whether or not film information (film size,
type) sent by diagnostic devices is checked.
"ON"
: Information is checked.
Error is returned to the diagnostic device if film
size or type in incorrect.
"OFF"
: Information is not checked.
In the event that incorrect size or type information
is sent, film is printed in accordance with used film
size and type settings (SCU settings) without
returning error information to the diagnostic
device.
FORCED SPECIFIED FILM
CH01~16 : OFF
This setting determines whether or not film information (film size,
USE
type) sent by the diagnostic device is ignored and film size and type
information settings in DRYPRO 793 used.
"ON"
: Film information sent by the diagnostic device is
ignored and film size and type information settings
in DRYPRO 793 used for printing.
"OFF"
: Supply tray selection and printing are carried out in
accordance with film information sent by the
diagnostic device.
DEFAULT TRAY
CH01~16 : 14x17 B
Sets film to be used in the event that the size type check (SCU
setting) is "OFF," or the forced specified film use setting is "ON."
Only film selected under [FILM SETUP] can be selected.
EMPTY NOTICE
CH01~16 :
This setting determines whether or not tray empty notification for
Film Info. 1 : ON
each type and size is sent to the diagnostic device.
Film Info. 2 : ON
(Films of same size but of different type are handed as different
Film Info. 3 : ON
films.)
In the case of diagnostic devices that are set to use only a specific
film size and type, it may not be necessary to send empty tray
notification for other film sizes and types. In such cases, setting the
empty tray notification of the channel to "OFF" will inhibit
unnecessary empty tray notification to that diagnostic device.
The film size and type set under [FILM SETUP] are displayed in this
column.
