Ch.6 Web Maintenance Mode
< 184 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
Item
Default
Descriptions
CONTRAST
CH01~16 : 0
Sets the image contrast.
Lower settings (-) produce lower contrast, higher settings (+) higher
contrast.
Settings may be made within a range of "-7" ~ "+7."
SMOOTHING
CH01~16 : 2
Sets the image smoothing type.
The higher the set value, the smoother the type.
(Values that are too high will produce blurring.)
Selection of a value of "7" will result in printing with a setting of
[Integral Multiple Ratio] (Print condition setting).
Settings may be made within a range of "0" ~ "7".
DENSITY MAX
CH1, CH2 : 300
Sets the maximum image density.
CH03 : 400
Settings may be made within a range of "150" ~ "460."
CH04~16 : 300
DENSITY MIN
CH01~16 : 20
Sets the minimum image density.
Settings may be made within a range of "10" ~ "30."
ILLUMINATION
CH01~16 : 2000
Sets the light table brilliance.
Settings may be made within a range of "0" ~ "38000."
Since the illumination level is usually sent by the diagnostic device,
changes to this setting are not necessary.
AMBIENT LIGHT
CH01~16 : 10
Sets the ambient light.
Settings may be made within a range of "0" ~ "38000."
Since the illumination level is usually sent by the diagnostic device,
changes to this setting are not necessary.
FLIP
CH01~16 : OFF
Sets image flip.
"ON"
: The image is printed flipped.
"OFF"
: The image is printed without being flipped.
SORTER BIN
CH01~16 : 1
Sets the destination bin number for printed film.
Settings may be made within a range of "1" ~ "6."
The sorter ascending/descending order setting is made under
[Sorter Setup] (Other settings).
FILM ORIENTATION
CH01~16 : PORTRAIT
Sets the orientation in which film is printed.
"PORTRAIT"
: Film is printed in vertical orientation.
"LANDSCAPE"
: Film is printed in horizontal orientation.
POLARITY
CH01~16 : POSI
Sets image POSI/NEGA.
"POSI"
: POSI film is printed.
"NEGA"
: NEGA film is printed.
BORDER
CH01~16 : Black
Sets the film background density.
"Black"
: Film is printed with black background density.
"Clear"
: Film is printed with clear background density.
TRIM
CH01 : OFF
Sets trim to ON or OFF.
CH02 : ON
"ON"
: Film is printed with trim.
CH03 : OFF
"OFF"
: Film is printed without trim.
CH04~16 : ON
PREVIOUS IMG POS
Re-output display frame
Specifies whether the image displayed on the re-output print screen
is the first or the last frame of the film.
EDGE ENHANCEMENT
CH1 : OFF
This setting determines whether or not edge enhancement is carried out.
CH2 : ON
"ON"
: Edge enhancement is carried out.
CH03 : OFF
"OFF"
: Edge enhancement is not carried out.
CH04~16 : ON
