Ch.2 Unpacking and Installation
< 33 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
2.1.2 Supply Tray (Option)
The components packed with supply tray are listed below.
2.1.3 Lis-793 (Option)
Use of the Lis-793 option enables discharged film to be allocated to six bins.
The components packed with the Lis-793 option (6ch sorter) are listed below.
Component Name
Quantity
Remarks
Tray Unit
1
Includes accuride rails
Pick up Unit
1
Accuride Rails
2
Cable (CH3 Signal Assy)
1
Pickup Unit ~ Mech Cntl Board
Cable (CH3 Power Assy)
1
Pickup Unit ~ Power IF Board
Pick-up Unit Securing Component
1
(For right side of main body)
Pick-up Unit Securing Component
1
(For left side of main body)
Cutter
1
TP screws M4X8
6
Fixing screw
Truss Screws M4X6
2
Screws for external covers.
Front Cover Unit Assembly
1
Tray Cover Assembly
1
Component Name
Quantity
Remarks
Sorter main body
1
Sorter Separation Unit
1
Sorter Exterior Assy
2
Sorter face cover, Sorter left cover
Sorter Exterior
2
Sorter front and rear covers
Blindfold Plate
1
Support
1
Used to secure bins
Retaining Plate
1
Bracket used to hold down bin from the top.
Stand
1
Support Bearing
Bin
5
Roller Bush
2
Cable (Sorter Signal Assy)
1
Connects the unit drive board to the
mechanical control board
Cable (Sorter Power Assy)
1
Connects the unit drive board to the
power IF board.
TP screws M4X8
13
Screws for attaching components
Sems 2 M3X6
2
Used to attach wire to sorter cover.
Truss Screws M4x8
7
Screws for external covers.
