Ch.2 Unpacking and Installation
< 46 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
10
Secure the Accuride rail with one screw (Truss
screw M4X6).
Accuride rail hooks should be inserted into the square holes in the slide supports (2
holes each at the front and back of the main body).
9
Extend the Accuride rails until the screw holes
are visible.
8
Secure the Accuride rails on the slide supports
on the inside of the main body.
(1)
(2)
Apply downward pressure on the Accuride while screwing into place.
6
正面のネジ2本(TPネジM4x8)を外し、両端のネ
ジ各1本(TPネジM4x8)を緩めて、
remove the
blindfold front cover from supply tray 2.
- The blindfold front cover is no longer needed.
Removed covers
should be kept for use
in the event that
unnecessary options
are removed in the
future. Disposal of any
unnecessary covers
should be carried out in
accordance with local
ordinances and
regulations.
7
Remove the Accuride rails from the pick up unit.
