E-11
d) Adjust the height of the four casters.
e) Double check the verification items
➀
and
➁
.
Note:
If there are any problems, go back to d) and read-
just the caster height.
f) To install the covers and other parts removed in
steps b) to c), reverse the removal procedure.
g) Plug in the connector removed in step a).
h) Move the finisher closer to the main body.
(21) Push the lever back to its original position.
Secure the finisher to the main body.
(One supplied mounting screw)
(22) Close the front door of the finisher.
(23) Remove the connector cover from the back of
the main body. (One screw)
(24) Plug in the two connectors of the finisher. Fit
the head of the cable tie into the mounting hole
on the main body.
(25) Reattach the connector cover removed in step
(23). (One screw)
Note:
Be careful not to pinch the harness.
(26) Install the user’s guide holder removed in step
(2).
