FS-601 Field Service Ver2.0 Sep. 2004
Mechanical adjustment
3-5
III
Ad
ju
stmen
t/
S
et
ti
n
g
11.
Adjust with the
▲
and
▼
Keys.
When the stapling position is shifted
to the direction A: Adjust the value to
the - side.
When the stapling position is shifted
to the direction B: Adjust the value to
the + side.
12.
Touch “END”.
13.
Make the copy and check again.
NOTE
• Set five or more sheets of original under the ADF, and then take copies and bind
them into a booklet.
3.1.2
DF-601-unequipped machine
1.
Set A3 or 11 x 17 to the Feed Tray.
2.
Select the functions as follows: Orig
Copy
→
4in1/Booklet
→
Booklet
→
Bind.
3.
Set A3 or 11 x 17 original (blank paper acceptable) on the Original Glass.
4.
Press the “Start” Key five times (to cause reading operation five times) Adjust the varia-
tion to the minimum by using five sheets.
5.
Touch the “Finish” of the panel.
6.
Press the “Start” Key.
7.
Take the Steps from 5 to 14 of (1) “DF-601-equipped machine” in 3.1.1 “Adjustment of
the stapling position”.
4583fs3501c0
A
B
A
B
A
B
Standard:0 ± 2 mm
<To - side>
<To + side>
<Standard>
<To + side>
<Standard>
4583fs3524e0
▲
Summary of Contents for FS-601
