12
EN
PUNCH G2
PUNCH G2 Die Sets
The PUNCH G2 uses a variety of easily interchangeable die sets that allow you to punch documents in line for several different binding styles. By
selecting the appropriate die set, you can use your PUNCH G2 to punch documents in any of the following binding styles. Heavy Duty (HD)
die sets
are shown in bold where available.
Die Set Description
Part Number
For Plastic Comb Binding:
Die, Konica Minolta, Comb Bind
Die, Konica Minolta, Comb Bind, HD
7714911
PB Plastic Bind; Hole Size: 8mm x 2.9mm (0.313" x 0.116") (LxW); Center-to-Center Hole Spacing: 14.3mm (0.563")
Fo
r Twin Loop™ Binding:
Die, Konica Minolta, Wire 3.1, Sq.
7714913
W3 Wire; Square; 3 Holes per inch; Hole Size: 4mm x 4mm (0.156" x 0.156") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
Die, Konica Minolta, Wire 2.1, Sq.
7714912
W2 Wire; Rectangle; 2 Holes per inch; Hole Size: 6.4mm x 5.4mm (0.250" x 0.214")(L xW); Center-to-Center Hole Spacing:
12.7mm (0.500")
Die, Konica Minolta, Wire, 3:1, Rnd.
7714903
W3 Wire; Round; 3 Holes per inch; Hole Size: 4mm (0.158") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.335")
Die, Konica Minolta, Wire, 2:1, Rnd.
7714902
W2 Wire; Round; 2 Holes per inch; Hole Size: 6.5mm (0.0.256") Diameter; Center-to-Center Hole Spacing: 12.7mm (0.5")
For Color Coil™ Binding:
Die, Konica Minolta, Coil, Rnd.
Die, Konica Minolta, Coil, Rnd, HD
7714901
7714917
C4 Coil; Round; 4 Holes per inch; Hole Size: 4.4mm (0.174") Diameter; Center-to-Center Hole Spacing: 6.3mm (0.2475")
Die, Konica Minolta, Coil, Oval
7714914
C4 Coil; Oval; 4 Holes per inch; Hole Size: 4mm x 5mm (0.158" x 0.197") (L x W); Center-to-Center Hole Spacing: 6.3mm
(0.2475")
For Velo
®
Bind:
Die, Konica Minolta, Velobind
®
, 11 Holes, Ltr.
7714909
VB Velobind
®
; Round; 1 Hole per inch Hole Size: 3.2mm (0.125") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
Die, Konica Minolta, Velobind
®
, 12 Holes, A4.
7714910
VB Velobind
®
; Round; 1 Hole per inch Hole Size: 3.2mm (0.126") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
For Loose Leaf Binding:
Die, Konica Minolta, 3 Hole, 8mm
Die, Konica Minolta, 3 Hole, 8mm, HD
7714904
7714918
3 Ring Binder; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
Die, Konica Minolta, 3/5/7 Hole, 8mm
7714905
3 Ring, 5 Ring, 7 Ring; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
Die, Konica Minolta, 4 Hole, 8mm
7714906
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 8mm (0.315") Diameter
Die, Konica Minolta, 4 Hole, 6.5mm
7714907
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
Die, Konica Minolta, 4 Hole, Scan
7714908
4 Ring Binder; Scandinavian (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
©2016 GBC, Lake Zurich, Illinois - All rights reserved.
Graphics do not represent actual punch pattern dimensions or spacing.
* When the Plastic Comb binding die is used in the 21 hole configuration on A4 width paper (297mm), there is the potential for the outer edge of holes 1 and 21 to
be torn. The theoretical paper edge should be 1.62mm from the edge of the sheet. This event is dependent on paper type, paper width and hole alignment
optimization. To avoid this issue, it is recommended to use a 20 hole configuration instead. 20 hole comb binding supplies are commonly available from GBC and
other manufacturers and are considered more optimal than the 21 hole configuration.
1
21-A4
19-LTR
1
34-A4
32-LTR
1
23-A4
21-LTR
1
32-L
34-A4
TR
1
23-A4
21-LTR
1
47-A4
44-LTR
1
47-A4
44-LTR
1
11
1
12
1
3
1
7
4
1
4
1
4
