E-1
HD-505
Hard disk
INSTALLATION MANUAL
16GA97010
I. Accessory parts
II.Caution for handling
1. Precautions against static electricity.
•
Keep the hard disk in an antistatic bag while
transporting it or storing it.
•
When working in places where static electricity
tends to accumulate, such as on a carpet, dis-
charge electricity from your body by touching-
any metallic portion before handling the hard
disk.
2. Do not touch the contacts on the hard disk with
your hands, as that may result inpoor conductivity.
3. Do not physically damage the hard disk by drop-
ping it, bending it, etc.
4. When handling the hard disk, hold the circuit
board by both sides so that no pressure is applied
to the circuit board face or the top cover.
III. Installation procedures
1. Turn off the machine’s sub and main power switches,
and unplug the power cord from the outlet.
2. Remove the back cover(6 screws).
3. Remove the board cover (4 screws).
4. Install the hard disk unit.
(1) Set the dampers onto the board cover and
hard disk support material.
No.
Name
Shape
Q'ty
1. Hard disk
16GAIXC001SA
1
2. Shoulder screw
16GAIXC002SA
8
3. Damper
16GAIXC003SA
8
4. Hard disk sup-
port material
16GAIXC004SA
2
5. Cushion
16GAIXC005SA
1
6. Flat cable
16GAIXC006SA
1
7. Installation
Manual
1
16KAIXE001SA
Back cover
16KAIXE002SA
Board cover
16GAIXE007SA
Damper
Hard disk
support material
Damper
Damper
Board cover
Applied Machines: 500/420
MFP 50ppm/42ppm
