E-2
2. Installation procedures
(1) Turn OFF the power switch and unplug the
power cord from the power outlet.
(2) Remove the cover from the operation panel.
(Two screws)
(3) Insert the keypad to the operation panel.
(4) Plug in the connector of the keypad.
(5) Attach the supplied cover A to the operation
panel by inserting the four tabs through the slits.
(Two screws removed in step (2))
Note:
Use cover B when installing it onto models 367/
287/227.
(6) Affix the supplied label to the position shown
below.
Note:
• Do not execute this step when mounting to
C3850FS/C3850/C3350.
• Affixing the proper label which appropriate to
the applicable marketing area.
Tab
Label
