E-4
(13) Fit the tab of the mounting bracket B onto the
groove on the ceiling of the compartment as
shown in the illustration then slide the mounting
bracket B to the rear until the rail is fixed in the
main body.
Note:
After checking that the rail is secured in the correct
position, install the rail with the supplied screws.
(Four supplied screws B)
(14) Insert the mounting bracket A into the round
hole on the rail.
(15) Hold up the mounting bracket A and insert the
rail. Insert the protrusion of the mounting
bracket A into the round hole on the base of the
large capacity unit. (Two supplied screws A)
(16) Route the harness of the large capacity unit
through the hole of the rear right cover.
Groove
Tab
OK
NG
