E-8
(37) Remove the large capacity unit from the main
body.
(38) Reinstall the front and the rear covers. Tighten
screws on the right side (three screws each for
front and rear) and the left side (two screws
each for front and rear) of the large capacity
unit.
Note:
Before reinstalling the covers, position the right
adjustment rollers (front and rear) as shown in the
illustration.
(39) Reinstall the plate onto the rear side of the
large capacity unit. (Two screws)
(40) Insert the connector and insert the harness into
the wire saddle.
(41) Reinstall the right cover of the large capacity
unit and close the upper door of the large
capacity unit. (Four screws)
