Use the fax machine as PC printer
7
Rev. 1.1.1/22.10.99
MF 1400
7-9
7.5
Printing from a pure DOS application
Printing from a DOS application basically requires a different procedure
than printing of an application based on Windows. For this reason the
procedure is separately described below.
When you want to print a document from a pure DOS application, you
have to carry out the following two steps:
1. Create a print file.
2. Print the print file.
Creation of print file
1
Make sure you are working in Windows.
2
Select the “options“ tab in the Minoltafax 1400 control programme.
3
Make sure that the function “Deactivate Minoltafax 1400 printer from
DOS“ is not cross-marked.
4
Quit Windows.
5
Start the DOS application from which you want to print.
6
Set the HP DeskJet 500C printer as the present printer unit.
?
Two HP DeskJet 500C selectable?
There is a monochrome as well as a multi-coloured version of the
printer driver.
➜
If you want to print in one colour only, select the monochrome
version. If you want a multi-coloured print, select the multi-coloured
version.
?
HP DeskJet 500C not offered as printer?
➜
Use the HP DeskJet 500 as printer with which you can, however,
only make monochrome prints.
7
Creation of a print file.
?
How to create a print file:
➜
The respective information is given in the user’s guide of your
application.
Summary of Contents for Minoltafax 1400
