focus on the original. This typically happens when the original is higher than 2 inches above
the cradle. When not checked the PS 3000 will conduct the scan even though it is likely to
out of focus and distorted.
be
AEW W
Exposu
origina
will iss
3000 w
using th
rvature and this box is
checked it will issue a Binding Height Warning and abort the scan. If you choose to not check
cally occurs when scanning a flat
contact your local Minolta dealer as it may be indicative of a more
close after a scan is completed. When
the Batch Scan Mode selection box is checked it will cause the driver to remain open and will
arning
– This is the Auto Exposure Setting Warning. If you have chosen to use Auto
re then the PS 3000 will try to determine optimal exposure settings based on the
l materials and ambient lighting. If the PS 3000 cannot make an adequate judgment it
ue this error. If you choose to ignore this error by not checking the box then the PS
ill automatically disable the auto exposure (for just the immediate scan) and proceed
e AE setting as a manual exposure level.
Size Warning
– When using the Book Compensation feature, it is necessary for the PS 3000 to
detect the actual curvature of the book using a pre scan and the 45-degree mirror at the top of
the book cradle. If for any reason the scanner cannot detect the book cu
this box then the scan will not be aborted and the PS 3000 will capture the image without
applying any book curvature compensation. This error typi
surface with Book Compensation enabled.
If you are noticing a high degree of occurrence of any of these errors when their causes are not
typically present, please
serious hardware problems.
Batch Scan Mode –
The Batch Scan Mode might arguably be the most useful feature of the Minolta TWAIN
driver. With most application software the TWAIN driver UI is launched when an Import or
Scan command is given. Typically the driver will then
place a Done button in the File Transfer Status Window
.
Summary of Contents for MS 2000
Page 52: ......
