background image

SAFETY INFORMATION

vi

 

• Do not use flammable sprays, liquids, or gases near this

product, as a fire could result.

• Do not leave a toner unit or drum unit in a place within easy

reach of children. Licking or ingesting any of these things could
injure your health.

• Do not let any object plug the ventilation holes of this product.
• Heat could accumulate inside the product, resulting in a fire or

malfunction.

• Do not install this product at a site that is exposed to direct

sunlight, or near an air conditioner or heating apparatus. The
resultant temperature changes inside the product could cause a
malfunction, fire, or electrical shock.

• Do not place the product in a dusty place, or a site exposed to

soot or steam, near a kitchen table, bath, or a humidifier. A fire,
electrical shock, or breakdown could result.

• Do not place this product on an unstable or tilted bench, or in a

location subject to a lot of vibration and shock. It could drop or
fall, causing personal injury or mechanical breakdown.

• After installing this product, mount it on a secure base. If the unit

moves or falls, it may cause personal injury.

• Do not store toner units and PC drum units near a floppy disk or

watch that are susceptible to magnetism. They could cause
these products to malfunction.

• Tenez toujours tout produit inflammable -liquide, gaz et 

vaporisateur- à l’écart de l’appareil car ces produits posent un risque
d’incendie.

• Rangez toujours les unités de toner et les unités de tambour hors de

portée des enfants. L’ingestion de ces produits ou leur contact avec la
bouche pose un risque pour la santé.

• N’obstruez jamais les orifices de ventilation de cet appareil avec

quelque objet que ce soit.

• La chaleur risquerait de s’accumuler à l’intérieur de l’appareil, provo-

quant un incendie ou une panne.

• N’installez pas cet appareil dans un endroit directement exposé aux

rayons du soleil, ni à proximité d’un climatiseur ou d’un appareil de
chauffage. Le changement de température ainsi provoqué à l’intérieur
de l’appareil risquerait de causer une panne, un incendie ou une électro-
cution.

• N’installez pas cet appareil dans un endroit poussiéreux et évitez égale-

ment les endroits exposés à de la suie ou de la vapeur, à proximité d’une
table de cuisine, d’une baignoire ou d’un humidificateur. Cela risque-
rait de provoquer un incendie, une électrocution ou une panne de
l’appareil.

UC8_UG.book  vi ページ  2010年2月25日 木曜日 午後12時29分

Summary of Contents for MS6000 MK II





























Reviews: