Printing on Media
40
3
Remove the tray cover from Tray 1. Place the postcards on a flat surface,
and flatten them by pressing down the corners.
4
Remove any media in Tray 1.
5
Load the postcard media lengthwise and printing-side up in Tray 1.
6
Adjust the paper guides to the width of the postcards.
Note
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
7
Print the postcards.
How do I load and print thick stock?
Test all thick stock to ensure acceptable performance and to ensure that the
image does not shift.
Do not use thick stock that is
Mixed with any other media in the media trays (as this will cause printer
jamming)
Note
Do not mix thick stock with any other media in the same tray, as this will
cause printer jamming.
1
In the printer driver (
Setup
tab/
Media Type
option), select
Thick Paper
.
2
Select the size of the stock (
Paper
tab/
Original Document Size
option).
3
Remove the tray cover from Tray 1. Load the thick stock media lengthwise
and printing-side up in Tray 1.
4
Adjust the paper guides to the width of the thick stock.
Note
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
5
Print the thick stock.
Summary of Contents for PagePro 1350EN
