PC-401
– 7 –
■
Installing the Ornamental Cover
■
Affixing the Paper Size Label
•
If width A is greater than the specified value,
turn screw D counterclockwise.
4002U106AA
D
•
If width A is smaller than the specified value,
turn screw D clockwise.
4002U105AA
D
10. Load paper and let the machine produce
another test print. Then, check width A.
*
Make the adjustment until width A falls within
the specified range.
11. Tighten the adjusting screw
.
12. Touch “END.”
13. Touch “Fin. Time” on the Tech. Rep. Mode
screen.
1. Press the Paper Descent button and then
slide out the drawer from the Paper Feed
Cabinet.
2. Install the Ornamental Cover attached to the
machine (two screws).
3. Slide the drawer back in.
4348U050AA
4348U010AA
1. Affix the Paper Size Label furnished with the
Paper Feed Cabinet to the location shown in
the illustration.
4348U007AA
