E-1
INSTALLATION MANUAL
A10Y955000
PI-506
Post Inserter
I. Accessory parts
II. Preliminary preparations
When installing the PI-506 to the Finisher, install the
PI-506 first then install the Finisher to the main body.
Note:
When handling the PI-506, grip it as shown in the
illustration below.
III. Installation Procedures
1. Remove the top cover from the Finisher.
(1) Remove the two screw covers at the rear side
of the top cover, then remove the screws.
(2) Open the front door and remove the 3 screws.
(3) Remove the top cover.
No.
Name
Shape
Q’ty
1. PI-506
15JFIXC001SA
1
2. Wire bundle
cover /1
15JFIXC002SA
1
3. Screw cover
15JFIXC003SA
1
4. Positioning
screw
2
5. TP screw
M4x6
3
6. Truss screw
M4x6 (black)
1
7. Installation
manual
1
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, be sure to take a good position of not
being excessively loaded. (mass: approx. 10.5kg)
15JFIXC004SA
Screw covers
15JFIXE005SA
15JFIXC006SA
15JFIXE007SA
Top cover
Applied Machines: FS-528/FS-611
