Configuring PostScript Printer Driver Properties for Windows NT 4.0
7
Printer Controller Pi3505e Pi3505e/PS
7-5
✎
Note
Store to HDD
can be selected only when the Hard Disk
Drive Kit (HDD-6) is installed on the machine.
■
Password 1-4
If you select
Lock Job
for
Job Life
, specify the 4-digit
password you want assign to the locked job, in the range of
0000 to 9999 (4 digits).
A locked printing job will be printed after it is unlocked using the
Job List screen on the machine’s control panel. Note that the
machine operator must be able to input the password when
unlocking the job.
Available
settings:
0 – 9
Set the 4-digit password you want to assign to the locked job,
in the range of 0000 to 9999 (4digits).
(Example) To specify the password “1234”, you would input the
following.
Password 1: 1
Password 2: 2
Password 3: 3
Password 4: 4
■
Account Code
Turn on this item to enable the copy tracking function, which
attaches an account code is to each print job and facilitates
machine management. Note that the copy tracking function
must be enabled on the machine in order to use this function.
Enabling the copy tracking function on the machine can cause
printing to can make printing impossible unless the access
code designated for the machine is correctly configured.
Available
settings:
Off, On
Summary of Contents for Pi3505e
Page 1: ...Printer Controller Pi3505e Pi3505e PS User Manual 4513 7734 01 www konicaminolta net ...
Page 11: ...x Printer Controller Pi3505e Pi3505e PS ...
Page 23: ...1 Before Using the Printer Driver 1 12 Printer Controller Pi3505e Pi3505e PS ...
Page 217: ...9 PS Utility 9 4 Printer Controller Pi3505e Pi3505e PS ...