E-11
<Tri-fold position adjustment>
First fold position adjustment
1. Check the width of the first fold position “a.”
Reference: Unit: mm
2. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the Service Manual.)
3. Touch “Finisher.”
4. Touch “FS-FN adjustment.”
5. Touch “1st Tri-Fold Adjustment.”
6. Check that “ALL” is displayed in reversed.
7. Enter a value with
or
key and touch
“OK.”
• To make width a greater: Enter the value of
.
• To make width a smaller: Enter the value of
.
8. Touch “OK.”
9. Touch “Exit” on the Service Mode screen.
10. Make copies again and check the first fold posi-
tions deviate.
Second fold position adjustment
1. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the Service Manual.)
2. Touch “Finisher.”
3. Touch “FS-FN adjustment.”
4. Touch “2nd Tri-Fold Adjustment.”
5. Check that “ALL” is displayed in reversed.
6. Enter a value with
or
key and touch
“OK.”
• To make width a greater: Enter the value of
.
• To make width a smaller: Enter the value of
.
7. Touch “OK.”
8. Touch “Exit” on the Service Mode screen.
9. Make copies again and check the second fold
positions deviate.
Section Item
Normal value
Standard
A4R 8.5x11R 16KR
Fold
position
a
95
89.4
88
±2
b
102
96
92
±2
c
Not specified
A07UIXC026DC
b
c
First fold
Second fold
a