E-2
II. Installation procedures
Note:
When mounting the saddle stitcher, mount it
before mounting the finisher to the machine.
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the saddle unit and all other accessories
from the shipping carton and remove the protec-
tive tape and protective materials.
3. Remove the pin from the supplied exit lever.
4. Using the pin removed in step 3, attach the exit
lever to the supplied exit tray cover.
Note:
Make sure that the pin is fully inserted into the
holder.
5. If the finisher is mounted on the machine, remove
the finisher.
Note:
For the finisher removal procedure, see installa-
tion manual for finisher (FS-534).
6. Open the front door of the finisher.
7. Remove the front cover of the finisher (six
screws).
A3ERIXC032DA
A3ERIXC007DA
A3ERIXC008DA
Holder
A3ERIXC009DA